Troubleshooting

更多关于troubleshooting的信息，建议参考

https://software-dl.ti.com/ccs/esd/documents/ccs_debugging_jtag_connectivity_issues.html

(Error -2083 @ 0x0) or (Error -2172 @ 0xD)
Unable to communicate with the debug probe.
Confirm debug probe configuration and connections, reset the debug probe, and retry the operation.

可能原因：

解决办法：

(Error -180 @ 0x0)
The controller has detected a target power loss.
The user must turn-on or connect the power supply for the target.

(Error -183 @ 0x0)The controller has detected a cable break far-from itself.The user must connect the cable/pod to the target.

(Error -2131 @ 0x0)Unable to access device register. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK).